BONDERITE® L-FG F 50 is a micro-fine graphite, water based die lubricant formulated for flood or spray applications.  Suitable for difficult press work and highly automated processes including hot, warm and precision forging.

Apply by conventional spray techniques.  Supplied as a concentrate and can normally be diluted with ordinary tap water prior to use. The dilution ratio varies according to the difficulty of the job and the degree of cooling.

Important:  Add water to concentrate, not the reverse. Stir the concentrate thoroughly then slowly add one-part water while stirring until the mixture is homogenous. The remaining water may be added rapidly while stirring until the desired dilution and consistency are reached. 
 
Operation          Concentration
Initial trials                 1:10
Typical range             1:20
Severe operations      1:3

Faster substrate wetting.  Wets dies up to 371°C (700°F).
Excellent lubricity and release.
Superb dispersion stability, with little or no settling in concentrate.
Longer die life.

BONDERITE® L-FG F 50 helps provide a solution to the following industry & application problems: 

Shortened die life
Release issue
Excessive billet use and scrap

Lubricant: Micro Graphite
Carrier:   Water
Solids Content:  18.2-18.7%
pH of Concentrate: 10.0–12.0
Density: 9.2lbs. / gallon
Freezing Point:  32 °F
Viscosity (Brookfield):  8500-1,500 cP