BONDERITE® L-CA 633 (known as DAG 633) lubricant provides a durable coating for various casting applications up to 2000°F. It allows for superior solidification, mold release properties and metal flow characteristics.

BONDERITE® L-CA 633 should be spray applied. Coating thickness, usually 1-3 mils, should be achieved by applying thin, multiple coats. Molds should be preheatedd to approximately 350-400°F prior to application.

Non-staining
Non-wetting
Fine textures allows for near net shape manufacturing.
Good insulations at 9.47 W/mK thermal conductivity value at 2 mils.

BONDERITE® L-CA 633 helps provide a solution to the following industry & application problems: 

Premature Coating Failure
Flaking, Peeling Coating
Poor casting quality

Pigments:  boron nitride, titanium dioxide  
Appearance: white fluid 
Diluent:  water  
Density:  11 lb/gal  
Flash point: none  
Freeze data: protect from freezing  
VOC:  0.0 g/l